CLASS FLEKS FUGA POOL
High-performance, cement-based, flexible joint sealant resistant to pool chemicals, suitable for 1–6 mm joint widths.
Description
Application Areas
- Indoors and outdoors,
- In joints of large-format ceramics, tiles, and porcelain tiles,
- In narrow joints of natural granite, pressed brick, marble, glass mosaic, and natural stone blocks,
- Used in wet areas such as pools, water reservoirs, saunas, thermal baths, and bathrooms.
Application Information
The prepared CLASS FLEKS FUGA POOL should be filled into the joint gaps using a hard rubber-bottomed grouting float or a hard rubber squeegee.
This procedure should be performed by spreading first diagonally and then crosswise. Excess grout
remaining on the surface covering should be removed with a wet spatula without damaging the mortar in the joint gaps. After waiting 15–30 minutes, the thin mortar film remaining on the surface is cleaned with a damp
sponge or cloth. Surface cleaning and smoothing should be done while the mortar is still
fresh, using a dry cloth (such as waste cotton yarn/estoupe).
Consumption
Packaging
20 kg Kraft bag
