CLASS RUBBER PLUS
Description
Application Areas
- In water tanks, swimming and ornamental pools
- In waterproofing of wet areas such as bathrooms, WCs, balconies, and terraces
- On sloped terrace roofs
- On concrete, plaster, and screed surfaces
- Used in the waterproofing of galvanized sheet metal, aluminum, zinc, PVC eaves, concealed gutters,
and rainwater channels.
Application Information
Prior to application, surfaces are primed with CLASS RUBBER PLUS diluted with water at a 1:1 ratio. Consumption is approximately 100-250 g/m².
The primer is applied to the surface with a brush. Non-absorbent glossy surfaces must be roughened mechanically prior to primer application.
The primer coat is left to dry for 3-4 hours. CLASS RUBBER PLUS must be applied to the primed surfaces in at least two coats, adhering to the waiting time
between coats. Ensure that the underlying coat is completely dry before applying the subsequent coat. After completing the first coat application
consistently in the same direction, the second coat is applied in the opposite direction, perpendicular to the first.
Consumption
Primer application: 100-250 g/m²
Horizontal application: 1–1.5 kg/m² (for 1 mm thickness)
Vertical application: 0.800–1.00 kg/m² (for 1 mm thickness)
Consumption rates may vary depending on surface conditions, voids, and similar loss factors.
Packaging
20 KG Plastic Bucket
