Class Makina EL 100 – Interior and Exterior Fine Hand Plaster

CLASS MAKİNA EL 100

CLASS MAKİNA EL 100 is a cement-based, polymer-modified, high-performance fine hand plaster specially developed for application on brick, concrete, exposed concrete, aerated concrete, cinder block walls, pumice, and ceiling surfaces.

Description

Application Areas

  • Indoors
  • Exposed concrete, aerated concrete, brick, pumice,
  • Applied to concrete, cinder block wall, and ceiling surfaces.

Application Information

CLASS MAKİNA EL 100 cement-based hand plaster should be applied at a minimum thickness of 8-10 mm. The application thickness must be between 1-2.5 cm in a single coat. If the thickness exceeds 2.5 cm, the second coat application should be carried out after the first coat has fully set (1 day later). The second coat application should have a maximum thickness of 2.5 cm. Special aluminum profiles should be used for a smooth plaster application. Corner profiles should be used to prevent corner chipping. Machine plaster sprayed in horizontal strips must be leveled with dedicated aluminum screed profiles. After the plaster has hardened sufficiently, the surface should be floated. The surface application is finished with the help of a damp sponge. The plaster becomes ready for decorative plaster and/or paint after 7 days.

Consumption

Depending on the surface structure, approximately 14–15 kg/m² for a 1 cm thickness

Packaging

40 KG Kraft Bag

Similar products