Class Makina EL 300 – Interior and Exterior Coarse Hand Plaster

CLASS MAKİNA EL 300

CLASS MAKİNA EL 300 is a cement-based, polymer-modified, high-performance coarse hand plaster specifically developed for application on brick, concrete, exposed concrete, aerated concrete, cinder block wall, pumice, and ceiling surfaces.

Description

Application Areas

  • Indoors
  • Exposed concrete, aerated concrete, brick, pumice,
  • Applied to concrete, cinder block wall, and ceiling surfaces.

Application Information

CLASS MAKİNA EL 300 cement-based hand plaster should be applied at a minimum thickness of 8–10 mm. The application thickness must be between 1–2.5 cm in a single coat. If the thickness exceeds 2.5 cm, the second coat application should be carried out after the first coat has fully set (after 1 day). The second coat application must have a maximum thickness of 2.5 cm. Dedicated aluminum profiles should be used for a uniform plaster application. Corner bead profiles should be used to prevent corner breakage. The machine plaster sprayed in horizontal strips must be screeded using special aluminum screed profiles. After the plaster has hardened sufficiently, the surface should be floated with a trowel. The surface finish is completed with the aid of a damp sponge. The plaster becomes ready for decorative plaster and/or paint after 7 days.

Consumption

Depending on the surface structure, approximately 14–15 kg/m² for a 1 cm thickness

Packaging

40 KG Kraft Bag

Similar products