CLASS EPX-150
Description
Application Areas
- As a primer on damp or fresh concrete surfaces prior to waterproofing applications,
- As a primer on absorbent surfaces such as cementitious and epoxy-based screeds, plasters, glossy surfaces, and exposed concrete,
- As a primer on a wide variety of non-absorbent surfaces such as glass, wood, steel, and old ceramics,
- As a primer in areas requiring low VOC emissions, such as hospitals, pharmaceutical facilities, and food processing plants,
- As a primer prior to new applications over existing epoxy and polyurethane floor coatings,
- As an intermediate primer prior to new applications over freshly applied floor coatings whose recoating interval has expired,
- Used as a surface protector on concrete and plastered surfaces.
Application Information
CLASS EPX-150 can be diluted by gradually adding 5% to 20% clean water, depending on ambient conditions and the surface condition. It is applied using a roller, brush, or airless spray method. The prepared mixture is applied homogeneously to the pre-treated surface using the selected method. CLASS EPX-150 is applied in one or two coats until the surface is saturated and a continuous film layer is formed. Thorough back-rolling must be carried out to ensure complete surface penetration. The subsequent coat follows before the previous one begins to dry. The number of coats varies from one surface to another depending on absorbency.
- The material must be protected against water, rain, external ambient factors, and mechanical stress until it cures completely.
- The epoxy & polyurethane topcoat or waterproofing material must be applied 24 hours after primer application.
- It should be taken into account that curing/waiting times may shorten in hot weather and extend in cold weather.
Consumption
P- Water-Based Epoxy Primer – Concrete – 0.300 g
P Water-Based Epoxy Primer – Metal – 0.150 g
P- Water-Based Epoxy Primer – Wood, fiber cement, etc. – 0.160 g
Packaging
20 kg set in tin pails (A: 17 kg + B: 3 kg)
