CLASS THERMAL Linear Textured Decor should be spread evenly over the application surface using a steel trowel. The application thickness should be adjusted according to the largest granule
size. The application thickness is normally 2 mm. Depending on weather conditions, pattern should be textured onto the surface after 5-10 minutes with circular
movements using a plastic trowel. Texturing must be carried out while the decorative plaster is still wet. For large spans, application should continue with sufficient
personnel support to prevent visible joint marks. In cases where painting will follow, a waiting period of 2-3
days is strictly required, depending on weather conditions. This period may extend at low temperatures and shorten at high temperatures. On high-rise buildings exposed to wind loads
and during high ambient temperatures, moistening should be performed, and scaffolding should even be screened.