CLASS THERMAL Fine Decor should be spread evenly over the application surface using a steel trowel. The application thickness must be adjusted
according to the largest aggregate grain. Under standard conditions, the application thickness is 2 mm. Depending on weather conditions, after 5-10 minutes, pattern
texturing should be applied to the surface using a plastic trowel with circular movements. Texturing must be carried out while the decorative plaster is still wet. On wide surfaces, application
should proceed with sufficient workforce support to prevent noticeable cold joints. Before painting, a waiting period of 2-3
days is mandatory depending on weather conditions. This period may extend at low temperatures and shorten at high temperatures. In high-rise buildings subject to wind
loads and during high ambient temperatures, moistening must be applied, and scaffolding should even be shielded with netting.